LED Ribbon Flex 12v

This LED lighting “On-a-Roll” is available in a number of colours including: “Warm White”, “Pure White”, Red, Green, Blue, Yellow and Amber. It is supplied on a 10m roll and can be cut to size with cutting points every 50mm.
The “Ribbon Flex” has 60 super-bright LEDs per meter and has a sticky back so to fix in place, simply peal off the tape and the ribbon flex can be stuck to most surfaces.
“Ribbon Flex” emits negligible heat and uses very little power, so is an ideal solution for illuminating anything from a “Conference Set” to the underside of a display unit. “Ribbon Flex” is easy to install, simply join and cut to length your ribbon, connect to the power supply and switch on.
Note: Some basic soldering ability is required to join the lengths together. Up to 25m can be connected to each power supply.

Specification

Control: Psu 30amp will run 25 mtr
LED's: 60 per mtr
Beam Angle: 120 degrees
Dimensions: 10m roll
Weight: N/A
IP Rating: N/A
Power: 12v DC Via Control Psu
Wattage: 4.3 W

Manual.pdf