Our Range

Proflex 8 Eco :

Proflex 8 Pro:

Proflex 10 Pro:

Proflex 10 RGB Pro:
Indoor 4.8w per mtr 12v 10mtr Roll. Large choice of Single colours at cost effective price for long indoor runs. IP65 7.2w per mtr 12v 5mtr roll Crystal Resin coated for water protection with a large choice of Single colours and cost effective for long runs IP65 14.4w per mtr 12v 5 mtr roll Crystal Resin coated coated for water protection. Very powerful indoor/outdoor illumination. IP65 14.4w per mtr 24v 5 mtr roll Crystal Resin coated coated for water protection. Very powerful indoor/outdoor illumination with full RGB Control
IP65 Waterpoof rated this product may be used in wet areas and areas where the possibility of the unit being touched. It is also resistant to vibration. Perfect solution for many applications such as Casinos, airlines, health and fitness and many other discreet colour changing applications.

Our new and comprehensive range will suit many applications and now with the addition of our 14.4w per mtr RGB and single colour LED Technologies Proflex 8 & 10 is your only choice.

This LED lighting “On-a-Roll” is available in a number of colours including: “Warm White”, “Pure White”, Red, Green, Blue, Yellow and Amber. It is supplied on a 10m or 5mtr roll and can be cut to size with cutting points.

The “Ribbon Flex” has 60 super-bright LEDs per meter and has a sticky back so to fix in place, simply peal off the tape and the ribbon flex can be stuck to most surfaces.

Ribbon Flex emits negligible heat and uses very little power, so is an ideal solution for illuminating anything from a Conference Set to the underside of a display unit.

Ribbon Flex is easy to install, simply join and cut to length your ribbon, connect to the power supply (and contoller if using RGB) and switch on.

Proflex 8 Eco 12v 8mm 4.8w pm 3528 smd Open

 

Specification

LED’s: 60 per mtr 10mtr per roll
Beam Angle: 120 degrees
Dimensions: 8mm x 10m roll
IP Rating: Indoor
Wattage: 4.8 W per mtr 12v
Cutting point every 50mm
3M Sticky back

Colour Options

Warm White, White, Red, Yellow, Blue, Green

Proflex 8 12v Professional 8mm 7.2w pm 5050 smd Crystal Resin

The Professional LED ribbon flex is sealed with a high quality Crystal Resin sealant making it much more durable and IP65 waterproof rated. This product
may be used in wet areas and areas where there is the possibility of the unit being touched. The sealant also is resistant to vibration.

Specification

LED’s: 60 per mtr 5mtr per roll
Beam Angle: 120 degrees
Dimensions: 8mm x 3mm 5m roll
IP Rating: IP65
Wattage: 7.2 W per mtr
Cutting point every 50mm
3M Sticky back

Colour Options

Warm White, White, Red, Yellow, Blue, Green and Purple

Proflex 10 12v Professional 10mm 14.4w pm 5050 Crysal Resin

The Professional LED ribbon flex is sealed with a high quality Silicone dripped sealant making it much more durable and IP65 waterproof rated. This product
may be used in wet areas and areas where there is the possibility of the unit being touched. The sealant also is resistant to vibration.

Specification

LED’s: 60 per mtr 5mtr per roll
Beam Angle: 120 degrees
Dimensions: 10mm x 3mm 5m roll
IP Rating: IP65
Wattage: 14.4 W per mtr
Cutting point every 100mm
3M Sticky back

Colour Options

Warm White, White, Red, Yellow, Blue, Green and Purple

Proflex 10 RGB 24v Professional 10mm 14.4w pm 5050 Crysal Resin

The Professional LED ribbon flex is sealed with a high quality Silicone dripped sealant making it much more durable and IP65 waterproof rated. This product
may be used in wet areas and areas where there is the possibility of the unit being touched. The sealant also is resistant to vibration.

Specification

LED’s: 60 per mtr 5mtr per roll
Beam Angle: 120 degrees
Dimensions: 10mm x 3mm 5m roll
IP Rating: IP65
Wattage: 14.4 W per mtr RGB
Cutting point every 100mm
3M Sticky back

Colour Options

16.2million

 

LED Ribbon 24v DC PSU for RGB

250W AC230V DC24V 10A 250W Non-Waterproof 215 x 115 x 50mm

LED Ribbon 12v DC PSU for single colour

200w AC230 DC12v 10A 250W Non- Waterpoof 215x115x50mm

LED Ribbon RGB 24v Controller

Two simple controllers for RGB flex. Easy use, features colour change auto programs, speed control and easy to use. Available in wired or Wireless versions

Features:

Features: Wired Controller
Working Voltage: DC24V.
Size: 105 x 75 x 29mm
Channel load 4 Amp, Maximum 6 Amp.
Built-in 11 lighting modes.

Features: Wireless Controller
Working Voltage: DC24V.
Size: 162 x 138 x 47mm
Channel load 4 Amp, Maximum 6 Amp.
Built-in 11 lighting modes.
Range up to 10 metre.

 

DMX De coder for RGB flex

This is a simple controller for DMX and also has a number of pre-programmed colour changes. Static colour may also be sent shoud you not require a DMX controller. For use with the RGB Ribbon Flex and 24v PSU only

Home | Privacy Policy | Contact Us | © 2010 LED Technologies